Page 1 of 1
speado
Posted: Sat Sep 10, 2011 3:16 pm
by scotthesniper
Hi guys having trouble with speado cable fitting can't seem to get my big hand in anywhere to release it from the back of the speado its self
Re: speado
Posted: Sat Sep 10, 2011 3:24 pm
by LouiseM
Have you removed the speedo from the dash? There is a screw each side of the speedo holding it in. Access is via the hole in the side of the glove boxes. Don't undo the screws fully, just a few turns, and you should then be able to pull the speedo out far enough to undo the speedo cable.
Re: speado
Posted: Sat Sep 10, 2011 7:32 pm
by scotthesniper
cheers for the advice i had a look there were no screws in mine it was just needing a good old lever out.
kind regards
scot
Re: speado
Posted: Sat Sep 10, 2011 7:33 pm
by bmcecosse
If no screws - it would probably fall out.......
Re: speado
Posted: Sat Sep 10, 2011 7:47 pm
by scotthesniper
no its jammed in quit tight it has a metal ring around it and it was fairly tight coming out and going in but i will get srews to be safer
cheers
scot