Page 1 of 1
803 head on 1098 engine?
Posted: Fri Sep 09, 2011 9:03 pm
by GPO_Van
Hi All
I'm cutting down a long story here, but basically, after problems with my 1098cc engine I have been told after having unleaded valve seats fitted that it is in fact a 803cc head!!!!!!!!!!!!!!
Is this possible 1098 engine with an 803 head, I checked the valves with another 1098 engine and they are slightly smaller.
Any input appreciated
Thanks
Reg
Re: 803 head on 1098 engine?
Posted: Fri Sep 09, 2011 10:55 pm
by mike.perry
I'm sure someone would like an unleaded 803 head.
Re: 803 head on 1098 engine?
Posted: Fri Sep 09, 2011 11:10 pm
by bmcecosse
I think it is pretty much same as the 948 head. Will seriously drop the power of a 1098 engine. 1098 head will be marked 12G202. You really don't NEED unleaded - just set exhaust valve gaps to 15 thou, and check/reset every 3000 miles. Later 998 Mini heads are supposedly 'unleaded' - and are sometimes given away free.............
Re: 803 head on 1098 engine?
Posted: Sat Sep 10, 2011 11:16 am
by PulpitNeil
GPO_Van wrote:Hi All
I'm cutting down a long story here, but basically, after problems with my 1098cc engine I have been told after having unleaded valve seats fitted that it is in fact a 803cc head!!!!!!!!!!!!!!
Is this possible 1098 engine with an 803 head, I checked the valves with another 1098 engine and they are slightly smaller.
Any input appreciated
Thanks
Reg
Hi Reg,
What's your engine number? My gold seal 1098 has a 948 head, and I believe someone else on here had exactly the same issue before. Bizarre.
-Neil
Re: 803 head on 1098 engine?
Posted: Thu Sep 15, 2011 8:27 pm
by GPO_Van
Hi Neil
Sorry for delay in reply, engine number is 10 MA-U-H 168769
Reg