Windscreen rubber question

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
GPO_Van
Minor Fan
Posts: 179
Joined: Tue Sep 28, 2010 10:58 pm
Location: Wirral NorthWest, CH60
MMOC Member: No

Windscreen rubber question

Post by GPO_Van »

Hi all
I have a windscreen rubber question, on removing the faded central strip from the good windscreen rubber to fit a new one I noticed that under the windscreen rubber is another rubber, I though there was only one rubber around the windscreen not 2 pieces.
Please see pictures
Reg[frame]Image[/frame][frame]Image[/frame]
les
Minor Maniac
Posts: 9707
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: Windscreen rubber question

Post by les »

Mine's one piece, are you sure the two parts are definately seperate, and not one piece coming apart somehow?

DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Re: Windscreen rubber question

Post by DAVIDMCCULLOUGH »

I would guess that it is simply thick black mastic as there would be no room to fit 2 rubbers :-?


Too many Minors so little time.....
les
Minor Maniac
Posts: 9707
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: Windscreen rubber question

Post by les »

That's probably a better answer!

GPO_Van
Minor Fan
Posts: 179
Joined: Tue Sep 28, 2010 10:58 pm
Location: Wirral NorthWest, CH60
MMOC Member: No

Re: Windscreen rubber question

Post by GPO_Van »

Hi David and Les
You where correct, a large amount of black filler had been squeezed under the rubber when it was fitted, this had gone hard and brittle but retained the moulded shape of the rubber.
When I tried to peel it up it just crumbled.
Now need to replace the rubber, better now before the respray.
Thanks
Reg
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Windscreen rubber question

Post by bmcecosse »

Better to leave the screen out until after the respray - so the paint covers all the metal. Then fit a nice new rubber, and there shouldn't be any need for mastic/sealer.
ImageImage
Image
Post Reply