Page 1 of 1
Fitting a round heater to a series 2.1955.
Posted: Thu Sep 08, 2011 11:41 pm
by stanH
How do i fit a round heater?there is a jungle of wires and loom at back of the central clock that restricts the heater from getting in a position so i can line up and fit the 2 top bolts.No unusuall extra wiring to the car,but all the wiring seems to be bunched in that spot.Is there a way i can pull the wiring up and leave a clear space?Have taken both glove box linrfs out.stanH
Re: Fitting a round heater to a series 2.1955.
Posted: Fri Sep 09, 2011 5:34 pm
by Fingolfin
Wiring behind the dash can be fiddly, but it should all move out of the way nicely -- the only things that'd give much resistance if you propped it all out of the way somehow are the choke and starter cables, and those could be suitably propped with a bit of effort.
You could of course label the wires and take them all out...
Mods maybe move this to Electrical or Gen. Discussion? Not sure it's a resto thread.