Page 1 of 1
Engine mounts
Posted: Thu Sep 08, 2011 12:46 pm
by moray
Hi, does anyone know if the engine mounts are a different size between 948 and 1098 models.
I thought they where the same, but the guy at the body shop reckons they are different, and that is why the starter handle doesn't fit. He also says he checked a van and reckons it's different to my traveller.
Re: Engine mounts
Posted: Thu Sep 08, 2011 12:52 pm
by bmcecosse
Same mounts for all. Are the towers fitted right way round?
Re: Engine mounts
Posted: Thu Sep 08, 2011 2:18 pm
by mike.perry
The only different mounts are for the Series MM side valve engine
Re: Engine mounts
Posted: Fri Sep 09, 2011 11:22 am
by moray
Thanks guys, I'll pass this on to him
Re: Engine mounts
Posted: Fri Sep 09, 2011 11:26 am
by bmcecosse
Is the problem too low (or high) engine - or is it that the radiator is too low and getting in the way?
Re: Engine mounts
Posted: Fri Sep 09, 2011 11:41 am
by moray
From memory the engine is to high.
Re: Engine mounts
Posted: Fri Sep 09, 2011 8:02 pm
by bmcecosse
It' can't really sit high - or the gearbox would foul the rack. But I believe towers wrong way round can cause it to sit slightly high.