Page 1 of 1
Manifold and carbs
Posted: Tue Aug 09, 2011 6:07 pm
by Hopey66
Hi there
looking to buy a new Large Bore L.C.B manifold off ESM, and i was wandering if it will be able to have any carb on it or will i have to stick with the standard one?
thanks
Re: Manifold and carbs
Posted: Tue Aug 09, 2011 6:12 pm
by chrisryder
depends what inlet manifold you go for. LCB exhaust is just the exhaust manifold, so you'll need a separate inlet.
if you get one of these (below) you can fit a 1.5 inch HS4 or HIF38 or and 1.75 inch HS6 or HIF44. Failing that you could fit a twin carb setup off a midget or mini.
[frame]
[/frame]
Re: Manifold and carbs
Posted: Tue Aug 09, 2011 7:03 pm
by Hopey66
okay thats great, thanks very much!
Re: Manifold and carbs
Posted: Tue Aug 09, 2011 10:46 pm
by bmcecosse
A 'large' lcb manifold is not suitable for a standard engine - it will actually lose you power.......... What engine do you have ?
Re: Manifold and carbs
Posted: Thu Aug 11, 2011 10:32 am
by Peetee
These people are, as far as I am aware, the only ones who make a LCB specifically for the standard capacity engine.
http://www.maniflow.co.uk/maniflow_morris_exhaust.htm