Page 1 of 1

Help! Replacing some wood and where are the bolts and screws

Posted: Sat Jul 09, 2011 6:16 am
by pandm
We have taken out the front post, the foot rail just fell off and disintegrated!....and we are trying to get the front rail arch off…but apart from a bottom section which was rotten.... it won’t budge. Is this screwed to the bodywork somewhere? If so where? Can’t budge the wing (or is it called the wing flange?) as the bolts underneath are rusted out and almost attached to thin air.
Is there a metal piece that goes on the sides and bottom of the foot rail? How and where does the fillet go for the foot rail go together..... and how does the front pillar, foot rail and bottom of front wheel arch piece together and screw/glue etc? The front wheel arch now has a square cut, as we can’t get any more of it off…. could we leave a join like this if we cut off the bottom the matching bit from a new front wheel arch? Steve from Woodies made it sound so easy!!!!!! (LOL)…. Just getting the screws out is a feat in itself! Where and how much Dum Dum do we use and what about glue…where and how much? Here are some photos of where we are at so far…help and suggestions appreciated, please...need to work on this this weekend.[frame]Image[/frame]

Re: Help! Replacing some wood and where are the bolts and screws

Posted: Sat Jul 09, 2011 9:17 am
by bmcecosse
Certainly that wing has some rot and needs to come off to be repaired or renewed.

Re: Help! Replacing some wood and where are the bolts and screws

Posted: Sat Jul 09, 2011 10:38 am
by pandm
Yes,bmcecosse, I think you are right about the wing…..
We have fortunately decided that we have bitten off more than we can chew! So have spoken to a local specialist and he’s going to take a look at her this coming week. It’s always good to know when you are licked and out of your depth. After further inspection the wing is quite rusted out underneath and the wing screw/bolts are turning in fresh air and you can see the wood through the holes. Lordy…..the tribulations of owning a lovely old car. She is gorgeous, though and it will be nice to get her up together enough to drive again. Just wish we had the funds to restore her properly back to her former glory. Bit by little bit, I suspect. It would still be great to hear comments from other owners, though, so please keep posting advice or your opinions, or tales of your own renovation work relating to this area of wood/bodywork.
Maggie