Page 1 of 1
Carb & dizzy for 1951 side valve engine
Posted: Sun Jul 03, 2011 12:06 pm
by pradeepprabhua
Hello there pradeep here,
Iam looking for carburettor and the distributor (dizzy) for my 1951 side valve head engine.
please email me at
pradeep.prabhu.a@gmail.com.
Re: Carb & dizzy for 1951 side valve engine
Posted: Fri Nov 11, 2011 6:38 am
by pradeepprabhua
Got the required Distributor and the carburettor from Mr Bryan Gostling... Thank you...
regards- pradeep
engine mountings
Posted: Fri Nov 18, 2011 2:47 pm
by pradeepprabhua
[frame]
[/frame][frame]
[/frame]
Hello There,
iam looking for engine mountings for my 1951 side vavle head, the picture is from one of the restoration job of a MMOC member, the second pic from one of the catalogues found on net.
if any one has them or a source from where i can find.
i can get it done locally provided i could get some help on the dimensions.
cheers
pradeep
Re: Carb & dizzy for 1951 side valve engine
Posted: Fri Nov 18, 2011 3:14 pm
by chrisryder
i believe the early engine mounts are the same as the later minors gearbox mounts.
the items you have pictured (the diagram not the photo) are the engine mounts for a later minor with an A series engine.
Re: Carb & dizzy for 1951 side valve engine
Posted: Fri Nov 18, 2011 3:39 pm
by wimor
chrisryder wrote:i believe the early engine mounts are the same as the later minors gearbox mounts.
the items you have pictured (the diagram not the photo) are the engine mounts for a later minor with an A series engine.
That's right. Have a look on:
http://www.mmoc.org.uk/viewtopic.php?f=19&t=38030