Page 1 of 1
What inlet manifold is this?
Posted: Thu Jun 16, 2011 6:25 pm
by chrisryder
As the subject suggests... i found this inlet manifold but i'm not sure what it's off (and therefore if it's any good). Could it be the fabled MG one?
[frame]
[/frame]
As you can see, it's got locating rings.
[frame]
[/frame]
looks like it's big enough for a HIF44, didn't have a ruler on me to measure.
[frame]
[/frame]
The part number cast into it looks like 8CSM-ACR.
Any help much appreciated, cheers!
Re: What inlet manifold is this?
Posted: Thu Jun 16, 2011 7:34 pm
by 8009STEVE
Follow the link scroll down and you will see the manifold
http://fairthorpe.blogspot.com/2011_03_01_archive.html
Re: What inlet manifold is this?
Posted: Thu Jun 16, 2011 7:41 pm
by chrisryder
thanks steve, doesn't look like the same one though.
I've been told on another forum that it is indeed an MG Metro one
Re: What inlet manifold is this?
Posted: Thu Jun 16, 2011 8:23 pm
by welshrat
SNAP! I have also had one of these sat in my shed for many years and was unsure what it was. Part number is BC & M-A/CR, tell me about the " fabled MG one", not heard anything about this.[frame]
[/frame][frame]
[/frame]
Re: What inlet manifold is this?
Posted: Thu Jun 16, 2011 8:55 pm
by charlie_morris_minor
it looks like the one i took off an mg metro..
Re: What inlet manifold is this?
Posted: Thu Jun 16, 2011 11:30 pm
by don58van
Hello welshrat
Are you interested in selling your manifold? I am in Australia.
Cheers
Don
Re: What inlet manifold is this?
Posted: Fri Jun 17, 2011 10:15 pm
by AlanSills
Hi
The Manifold shown is for a Metro fitted to 1275 A Series Engines
Manifold is water heated
would need seperate exhaust manifold
I am using a branch lcmnifold with this type of manifold
it can be fitted with a HIF38 or HIF44
Alan
Re: What inlet manifold is this?
Posted: Sat Jun 18, 2011 11:30 am
by chrisryder
it'll be going onto a 1275 with a HIF44 and an LCB manifold, so it should work a treat!
Thanks for all the responses!