HELP we dont know what this stamping means
Posted: Wed Jun 01, 2011 7:39 pm
hi all we stripped the engine and found 1300 on the front block can any body help, the picture is a not goos but its the best we can[frame]
[/frame]
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
HELP we dont know what this stamping means
Page 1 of 1
Re: HELP we dont know what this stamping means
Posted: Wed Jun 01, 2011 8:31 pm
Show us a picture of the engine........and also lift the rocker cover and then show us a picture of the top of the cylinder head.
Re: HELP we dont know what this stamping means
Posted: Wed Jun 01, 2011 8:39 pm
[frame]
[/frame]
Re: HELP we dont know what this stamping means
Posted: Wed Jun 01, 2011 8:42 pm
[frame]
[/frame]
Re: HELP we dont know what this stamping means
Posted: Wed Jun 01, 2011 8:43 pm
[frame]
[/frame]
Re: HELP we dont know what this stamping means
Posted: Wed Jun 01, 2011 8:43 pm
[frame]
[/frame]
Re: HELP we dont know what this stamping means
Posted: Wed Jun 01, 2011 9:02 pm
OK now take the rocker cover off and take a photo.. The rocker cover is the bit on the very top with the oil cap in it.
Re: HELP we dont know what this stamping means
Posted: Wed Jun 01, 2011 10:12 pm
It's certainly not a '1300' engine..........Very likely a 1098 - certainly 1098 cam follower covers, and I think I can 'just' see the threaded hole for a thermo sensor in the head, and i don't see '950' cast in the side of the block.
Re: HELP we dont know what this stamping means
Posted: Thu Jun 02, 2011 12:41 am
A nicely painted 1098 from the tappet chest covers and breather pipe. Also temp gauge sensor hole in the head
Re: HELP we dont know what this stamping means
Posted: Fri Jun 03, 2011 8:00 pm
we also have highlighted every bit of numbers and mowag writing on the engine and gearbox smarten it all up