Page 1 of 1
Engine dimensions
Posted: Thu Apr 07, 2011 5:58 pm
by Alex'n'Ane
Does anyone know the dimensions of a 1098 engine? Am interested in the length to see how modern engines compare.
Zetec -50cm long -60cm tall K series -48cm long -60cm tall
http://westfield-world.com/enginespecs_car.html
Re: Engine dimensions
Posted: Thu Apr 07, 2011 7:23 pm
by Matt
its not dissimilar in overall dimensions to the zetec
Re: Engine dimensions
Posted: Thu Apr 07, 2011 8:06 pm
by chrisryder
what measurement do you want? head length? flywheel clutch face to starter dog? i've got a complete engine sat in the garage i'll happily pop the tape measure on it!
Re: Engine dimensions
Posted: Thu Apr 07, 2011 8:34 pm
by Alex'n'Ane
From the front pulley to the flat back face of the block? i guess thats what there measuring.
Re: Engine dimensions
Posted: Thu Apr 07, 2011 9:25 pm
by chrisryder
front of pulley to back edge of backplate (where box bolts on) = 435mm
the water pump sits further forward than the front pulley (about 30mm more).
if it is of any use, the width (i measured between the 'ears' that the engine mounts bolt to) is 350mm.