Morris Minor Owners Club

Hello,
I'm buying a traveller soon that has rot around the spring hangers, both sides. Which panel do the spring hangers fix too? I want to replace the whole panel as theres no metal that I can see to weld too!

Why are you buying it then?

Are you talking about the front or rear of the spring, or both .

It's cheap and I like a spot of welding! the holes are around the front spring mount.

http://morrisminorspares.co.uk/shop/pro ... 6f9680fec1

This one includes the spring and the end of the sill as well.

Thanks for the link. I must of missed them!

Those spring hanger on a plate panels are pretty good!
Dont forget to take lots of measurements from the original hanger to all the other suspension points and maybe consider (with the axle dropped) dropping a plumb line and marking on the garage floor to ensure you get the new hanger in the right place.

chickenjohn wrote:Those spring hanger on a plate panels are pretty good!
Dont forget to take lots of measurements from the original hanger to all the other suspension points and maybe consider (with the axle dropped) dropping a plumb line and marking on the garage floor to ensure you get the new hanger in the right place.

Good advice, cheers. And garage floor? If only. I'll find a nice flat spot in the road outside!

Also, if anyone has a thread already detailing the replacement of spring hanger/panel could someone send me a link. thanks very much!

David, when I used to run the old East Kent branch web site, I had a guide (complete with pictures) to front and rear spring hanger replacement on the site.

I passed on the site to a new webmaster a couple of years ago. I could however, try and put the pages up somewhere so you can have a read, they were when I did the hangers on my convertible which has passed two MOT's now and drives perfectly!

Sounds perfect. Cheers!