Page 1 of 1
Marina disc brakes
Posted: Tue Mar 22, 2011 10:48 am
by Alex'n'Ane
I Have a set of marina front disc on the 'project car' which i am going to take off and put onto anne for everday use. They are however still marina pcd and was wondering what was involved to covert them to minor pcd? Any one done this or know who to ask for the parts required?
Re: Marina disc brakes
Posted: Tue Mar 22, 2011 11:02 am
by d_harris
You need to get your local machine shop to re-drill them to 4"
its not a paticuarly complex job.
Re: Marina disc brakes
Posted: Tue Mar 22, 2011 11:11 am
by charlie_morris_minor
get in touch with esm as they did at one stage do them on an exchange basis
Re: Marina disc brakes
Posted: Fri Mar 25, 2011 6:16 pm
by Alex'n'Ane
Is it possible for anyone to post up a photo of the converted hub so i can see whats involved?
Re: Marina disc brakes
Posted: Fri Mar 25, 2011 6:38 pm
by GAS
Have a look here.
http://mog.myfreeforum.org/about2231.html
Page three,about half way down.You can see the back of the hub and what has been done to it...
I had my marina hubs redrilled to 100mm and bigger studs fitted.
Re: Marina disc brakes
Posted: Sat Apr 09, 2011 8:36 pm
by Alex'n'Ane
Will it be possible to just fit new studs the same diameter as the minor ones? Or re-fit the marina ones?
Re: Marina disc brakes
Posted: Sat Apr 09, 2011 8:47 pm
by GAS
marina studs have a bigger spline diameter but are the same thread as the moggy.
If you are fitting alloy wheels then change to thicker studs( i used montego studs)
Re: Marina disc brakes
Posted: Sat Apr 09, 2011 10:41 pm
by youngcamper
you can buy new marina hubs with moggy PCD from ESM.
Re: Marina disc brakes
Posted: Wed Apr 13, 2011 5:37 pm
by peteD
I have a pair of Marina hubs converted to Moggi PCD, i now require a pair of Marina PCD hubs would you be interested in doing a swap ?
Re: Marina disc brakes
Posted: Thu Apr 14, 2011 9:44 am
by Alex'n'Ane
Yes please, Pm sent