Nardi steering wheel - boss?
Posted: Tue Mar 08, 2011 1:06 pm
Hi,I have just been given a 14" Nardi steering wheel,can anyone please tell me where I can get a boss,(and I don`t mean the X missus),thanks,Cheers,Brian
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Nardi steering wheel - boss?
Page 1 of 1
Re: Nardi Pic
Posted: Tue Mar 08, 2011 1:16 pm
Hi,quick pic,[frame]
[/frame]
Re: Nardi steering wheel - boss?
Posted: Tue Mar 08, 2011 2:00 pm
http://www.motorspeed.com/store_main.as ... uct_id=606
unsure if it would fit on to the steering column though :S
unsure if it would fit on to the steering column though :S
Re: Nardi steering wheel - boss?
Posted: Tue Mar 08, 2011 4:02 pm
it could fit a mountney boss. if you measure the diameter of the centre hole, and how far apart two diagonally oposing bolt holes are, i'll measure my mountney and see if it's similar!
Re: Nardi steering wheel - boss?
Posted: Tue Mar 08, 2011 8:23 pm
Hi,I have sent off an e-mail to motorspeed to see if they have a hub or boss that will fit.The diameter of the centre hole is 60mm,which is just about 2 3/8 inches,.From hole to hole it is 37mm ( 1.1/2 inches ).from diagonal hole to hole 75 mm or 3inch,if that makes sense,thanks,Brian
Re: Nardi steering wheel - boss?
Posted: Tue Mar 08, 2011 10:57 pm
i think the mountney is a lot bigger than that. i'll get my tape measure out in the morning!