New windscreen rubber leaks
Posted: Sat Mar 05, 2011 3:45 pm
Hi, I have just fitted a new rubber and insert to solve a leak in the corner of the windscreen but the leak is still there. Any ideas?
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
New windscreen rubber leaks
Page 1 of 1
Re: New windscreen rubber leaks
Posted: Sat Mar 05, 2011 4:56 pm
Did you use a sealing compound between rubber and body?
Re: New windscreen rubber leaks
Posted: Sat Mar 05, 2011 7:33 pm
You shouldn't NEED any sealant if the rubber is made to fit the car...... 
Re: New windscreen rubber leaks
Posted: Sat Mar 05, 2011 8:41 pm
I had some leaing in my windows. I got some of this stuff
http://cgi.ebay.co.uk/Captain-Tolleys-C ... 588ced8f9b
my car has been bone dry every since and it has been out in some heavy down pours.
http://cgi.ebay.co.uk/Captain-Tolleys-C ... 588ced8f9b
my car has been bone dry every since and it has been out in some heavy down pours.
Re: New windscreen rubber leaks
Posted: Sat Mar 05, 2011 11:21 pm
Could it be the unsert? It seemed too long ans I cut off the excess? Chris
Re: New windscreen rubber leaks
Posted: Sat Mar 05, 2011 11:24 pm
No - it's always over long - by design to ensure it is long enough! The shape of the rubber at the corners will be the problem.
Re: New windscreen rubber leaks
Posted: Sun Mar 06, 2011 1:05 pm
Hi, Is it a case of taking the screen out or using the leak searcher suggested earlier?
Chris
Chris
Re: New windscreen rubber leaks
Posted: Sun Mar 06, 2011 2:02 pm
It's very much up to you - I guess depends how bad the leak is. And can you tell if the leak is between steel and rubber, or rubber and glass? The correct fix is to take it out - check everything carefully - and refit it properly. You may decide it's wise to put a bead of sealant round the window opening before fitting the seal. Window fitting is always best done on a warm day - with the sun on the rubber for an hour or so to make it nice and pliable.