Page 1 of 1

size of gaps on bodywork

Posted: Mon Feb 14, 2011 11:00 am
by xpress
Hi there, what's the size of the gaps on a pillar to front door and front door to b pillar on a good reference mog? Can anyone measure up and see how they differ and establish what is right? Also gap between top of door and the start of roof gutters. Thanks.

Re: size of gaps on bodywork

Posted: Mon Feb 14, 2011 8:27 pm
by aupickup
look at my sig picture for the rear gap on the front doors
prob about 3mm, same for the front to the wing
but the passenger side is all original