Page 1 of 1
marina disk breaks
Posted: Mon Feb 07, 2011 7:31 pm
by hotrodder13
got hold of sum single marina disks on hubs, but dont have any calipers would i just have to look for marina one ??
cheers tom
Re: marina disk breaks
Posted: Mon Feb 07, 2011 7:51 pm
by charlie_morris_minor
marina or ital calipers are what you after.
alternatively you can fit mgb calipers with a few mods.. i will let you know more / with photos etc when i have completed the job.
the advantage being they are far more abundant / cheaper outright purchase etc etc
Re: marina disk breaks
Posted: Mon Feb 07, 2011 7:52 pm
by hotrodder13
okok thanks pal
Re: marina disk breaks
Posted: Mon Feb 07, 2011 8:43 pm
by bmcecosse
Are they 3.75" pcd ?
Re: marina disk breaks
Posted: Mon Feb 07, 2011 10:00 pm
by charlie_morris_minor
calipers do not have a pcd so i do not understand your question roy
Re: marina disk breaks
Posted: Mon Feb 07, 2011 10:03 pm
by phurn
No, but the hubs do, I believe that's what he's referring to.
Re: marina disk breaks
Posted: Mon Feb 07, 2011 10:58 pm
by chrisryder
i believe esm do a line in recon or even remanufactured marina calipers. i could have imagined it though!
Re: marina disk breaks
Posted: Tue Feb 08, 2011 7:08 am
by M25VAN
Re: marina disk breaks
Posted: Tue Feb 08, 2011 8:01 am
by hotrodder13
the pcd has been redrilled to 4x108 with extra long studs put in and a spacer, managed to get a 17x8 wheel on the front and rear just need to widen the wing 1 and a half inch and it miss's all suspension parts
Re: marina disk breaks
Posted: Tue Feb 08, 2011 11:37 am
by bmcecosse
So - that's Ford wheels I believe ?
Re: marina disk breaks
Posted: Tue Feb 08, 2011 12:11 pm
by charlie_morris_minor
you only mention having the hubs and disks.. stupid question.. you do have the back plate and mounting plate ( not sure if that is the correct word) as well?
Re: marina disk breaks
Posted: Tue Feb 08, 2011 12:23 pm
by hotrodder13
yep is it ford pcd, and i do have the mounting plate, just need calipers and new disks
Re: marina disk breaks
Posted: Tue Feb 08, 2011 6:36 pm
by twincamman
I know the brake pads are the same as the Dolomite, maybe the calipers are as well?
