Page 1 of 1
petrol gauge stopped working?
Posted: Sun Jan 23, 2011 11:04 pm
by puchmaxikid
Hi there. anyone have any clues why my petrol gauge just reeds full?
Many thanks Loz
Re: petrol gauge stopped working?
Posted: Sun Jan 23, 2011 11:10 pm
by beero
Take the wires off the sender, if it still reads full you have an earthing problem in the wiring. If not then it is probably the sender itself.
Re: petrol gauge stopped working?
Posted: Sun Jan 23, 2011 11:12 pm
by puchmaxikid
beero wrote:Take the wires off the sender, if it still reads full you have an earthing problem in the wiring. If not then it is probably the sender itself.
Thnakyou for that! ill give that a go. if its an earth problem do you no wereabouts they earth?
Thanks again Loz
Re: petrol gauge stopped working?
Posted: Sun Jan 23, 2011 11:39 pm
by beero
Probably where it goes through a hole in the bodywork and the grommet has perished. I think it runs under the floor next to the chassis rail and passes the clutch mechanism, that is a possible area where the loom has come loose and has been rubbed.