Morris Minor Owners Club

i wana know how much i have lowered mine from a standard moggy properly, can some one please measure from the ground to the bottom of the lip of the grille please and also from the ground to the lip at the bottom below the boot lid

thanks a lot

tom

Difficult to know, since who knows if their Minor is standard clearance these days? Most of them have been stripped and rebuilt at least once, and all of them have sagged under their own weight, I would think.

Nevertheless...the standard clearance from the ground to the center of a torsion bar, at least on MMs, was 10 11/16ths inches. This height was the same front and back of the bar. For the rear, the clearance from the ground to the center of the hole in the towing post on the inner wings was 15 7/16ths.

thanks for that