Page 1 of 1

SU HS4 1 1/2" carburettor

Posted: Mon Nov 08, 2010 8:29 pm
by jagnut66
Hi,
Can somebody tell me what this other feed is for?
I know that the fuel feed goes into the swirl chamber; there is a small nozzle with a black rubber cap over it at present (just visible in the picture poking up at the front) which I believe is for the vacuum; so what attaches to this other outlet shown on the side of the main body of the carburettor??
Many thanks. Mike.

[frame]Image[/frame]

Re: SU HS4 1 1/2" carburettor

Posted: Mon Nov 08, 2010 9:06 pm
by ratrodmog
Hi Mike, I have this outlet connected to a piece of tube that runs to my breather in the rocker cover. If you have a standard cover with the pipe on then is an easy fit or, if like me, you have an alloy rocker cover with no breather vent then drill a hole in the rocker cap and feed a pipe into the hole.

The tube is the one that looks like a piece of hose pipe, but it's a bit of fuel pipe.
[frame]Image[/frame]

Hope that helps you.

Re: SU HS4 1 1/2" carburettor

Posted: Mon Nov 08, 2010 9:40 pm
by bmcecosse
That's it - this the best way to suck the fumes out of your engine crankcase. Take advantage of it - it prevents nasty smells/oilleaks and cuts oil consumption.

Re: SU HS4 1 1/2" carburettor

Posted: Mon Nov 08, 2010 10:05 pm
by jagnut66
Thanks very much for the info.
Best wishes. Mike.