Page 1 of 1

lowlight grille wanted

Posted: Fri Nov 05, 2010 10:57 pm
by mmjosh
hi i have tried the wanted section but no luck so has anyone got a lowlight grille in rough condition

cheers Josh

Re: lowlight grille wanted

Posted: Fri Nov 05, 2010 11:53 pm
by DAVIDMCCULLOUGH
Theres one on ebay at the moment being sold stripped down into all the parts. Do a search for morris lowlight. It robably wont be cheap. I think you can get them in fibreglass as well.

Re: lowlight grille wanted

Posted: Tue Nov 09, 2010 1:55 pm
by Squiggle
mmjosh wrote:hi i have tried the wanted section but no luck so has anyone got a lowlight grille in rough condition

cheers Josh
Do you mean the chrome insert?

Re: lowlight grille wanted

Posted: Wed Nov 10, 2010 10:34 am
by Squiggle
Squiggle wrote:
mmjosh wrote:hi i have tried the wanted section but no luck so has anyone got a lowlight grille in rough condition

cheers Josh
Do you mean the chrome insert?

Re: lowlight grille wanted

Posted: Wed Nov 10, 2010 4:56 pm
by mmjosh
no its the front panel that im after

Re: lowlight grille wanted

Posted: Thu Mar 10, 2011 11:20 am
by hdavy
I have a lowlight grille which is chome in pretty good condition. I am reluctant to let it go but if your need is urgent I would consider selling it for £50. You would have to collect it from Kingston, Surrey. Also have a sound but scruffy surround. £35. These are among the many spares I have fior my 1950 lowlight which has been sitting outside as a non runner for about 4 years because I have not yet managed to fit it with the ALTA head conversion which I have. I am under great pressure to get rid of it which I naturally don't really want to do but I have a 1000 and and MGA as well!

Re: lowlight grille wanted

Posted: Thu Mar 10, 2011 5:47 pm
by mike.perry
Wife Forces Sale :(

Re: lowlight grille wanted

Posted: Thu Mar 10, 2011 7:01 pm
by RobThomas
I'm part-way through repairing one. I did wonder about making a new one from scratch but utilising the top rail and bottom gills from a M1000 one. Wheeling the other bits doesn't look too hard but the time involved in welding and finishing would be high. It would be easier to fabricate one in Ali and with no gills at the bottom. There is, however, the possibilty that I won't need the one I'm currently working on but then you'd need the sid cowls, grille and lamps.
Wheeling these panels is hard on the thumbs and I've still not got my left hand working properly.

Image

Re: lowlight grille wanted

Posted: Sun Mar 20, 2011 8:21 pm
by hdavy
Just to be clear.Is itthe grille you want ort only the surround which holds it?