Page 1 of 1
13" slot mags
Posted: Mon Oct 25, 2010 11:11 pm
by mmjosh
hi all im after 2 13" slot mags for the front of my morris minor in a couple of months after i have bought some 14" for the back which im saving for at the minute what sort of price would 13" slots cost
Re: 13" slot mags
Posted: Tue Oct 26, 2010 10:42 am
by ratrodmog
Got mine years ago for about £50. They needed a full refurb so expect to pay a bit more if they are in good condition. Always worth an ask on the NSRA forum or Rods 'n' Sods as they are often used on hot rods with a Vauxhall Viva front end as they have the same stub spacing.
Re: 13" slot mags
Posted: Tue Oct 26, 2010 11:25 am
by mmjosh
ok i am looking for ones that i can polish up myself
Re: 13" slot mags
Posted: Tue Oct 26, 2010 1:15 pm
by ratrodmog
Re: 13" slot mags
Posted: Tue Oct 26, 2010 1:18 pm
by mmjosh
only want 2 though and they dont fit i dont think
Re: 13" slot mags
Posted: Tue Oct 26, 2010 1:21 pm
by d_harris
They do have the relevant PCD for minor, however at 8" they are ruddy wide
225/235 tyres anyone... (235/55/13 give a 0.17% rolling diameter difference from 145/14s..)
Re: 13" slot mags
Posted: Tue Oct 26, 2010 2:30 pm
by bmcecosse
8" wide - racing tyres only I suspect! Ideal set for track-day use!
Re: 13" slot mags
Posted: Tue Oct 26, 2010 4:57 pm
by ratrodmog
It does say that they have been drilled for BMC cars and have a 4" PCD as well as the Ford PCD. I have 14" x 8" Slot Mags on the back which stick out fairly far and tyres seemed easy enough to find although it may be different for 13" wheels of that width.
Josh, I'm sure if you purchased these and only used two then the other two would be easy enough to sell on
