Morris Minor Owners Club

I've been trying to find a part for ages without success.
1962,948 cc.

The part is called, a "Ferrule Pin", a "Barrel" or sometimes a "Clevis" Pin, but basically it's the chrome like round fitting that the accelerator cable passes through on it's way to the carb.
It seems to be secured with some sort of split-pin or circlip, but it's hard to tell as this seems to have fallen off.
I attach a picture below, the part is numbered, "44".

Where can ID get one of these?

Best wishes[frame][/frame]

How about this.... http://morrisminorspares.co.uk/shop/pro ... 63dcc1a23e

hello,
Thanx for your reply.
The part you suggest is for the choke cable(see attached pic) whereas the part I need is for the accelerator cable. numbered 44, in the first picture.
Thanx again for contacting me, wonder if you can direct me to the part?
best wishes[frame][/frame]

You may be able to find the part you need here: http://www.sucarb.co.uk/

i have some second hand ones

Easy to make one - by drilling a hole through a bolt and nipping the cable between two nuts(with washers) - one either side of the hole.

Hiyas,
many thanks, I seem to have sourced one .
however, I may get back to you if it doesn't transpire.
Thank you very much.
Best wishes