Page 1 of 1

flaky paintwork

Posted: Thu Oct 14, 2010 12:27 pm
by markthe45king
Lily B's rear door had a chipped / flake paint section about 2inches by an inch on the bottom corner by the rear wing.

This has now come clean off, taking us right back to bare metal - so basically what do i do??

i am rubbish, sorry!

Re: flaky paintwork

Posted: Thu Oct 14, 2010 6:01 pm
by PSL184
Properly degrease the area then blow over with primer and top coat. After a week (to let the paint harden) cut it back to blend in with the rest of the wing - Simples :lol: