wings and boot, new boot on (new piks)

[hotrodder13]

ive got to replace my boot after backing into sanother car, im replacing it with fiberglass but its not got any holes drilled, how long does it take to drill and fit one and is it a job i can do by myself, also how hard is it to change the rear wings, but my inner wings are a bit rotten,

thanks tom

[chickenjohn]

If the inner wings are rotten, then the mounting bolts may be rusted into the captive nuts and the rusted nut and bolt just turn and turn in their cages! Lots of penetrating fluid and possibly mole grips to grip the captive nuts while you undo the wing bolts with a socket. If you have to do that to each bolt then it could take a while, plus, while the wings are off, I would repair the inner wings if as you say they are rotten. Also, the wing mounting flange may very well be rusted all the way through and require replacement. So a simple replacement of the rear wings to be done properly could very well end up as a bit of a project with the car off the road for weeks.

Oh, and I know I keep banging on about it here, but having the right size spanners and sockets (1/4 WHITworth) really plays dividends when you are attempting to undo rusted on wing mounting bolts.

I can't comment on drilling of the fibreglass boot having never done, one, but see if you can find a good 2nd hand original steel bootlid or if you can panel beat out the dents on yours.

Some pictures please!

[hotrodder13]

its not dinted ill get a pik up 2moro its split right across the bottom, i know i could have got a repair panel but i wanted a smoothed out fiberglass one and the inner wings have had a few repair patches already which i dont like

[beero]

Just had my back wings off, major job freeing the bolts, and now a LOAD of welding to be done.[frame][/frame]

[Fingolfin]

Hey, I had a nice patch to do that looked about exactly like that in the same spot. It wasn't awfully difficult, I guess, but annoying to shape properly, because of the weird geometry of that section.

Or maybe that's just me!

[hotrodder13]

heres the damage[frame][/frame]

[bmcecosse]

Oh dear - was there no rear bumper - to take the 'bump' ?

[hotrodder13]

thats the main problem when you debumper a car, the rear bumper fell off a while ago while driving

[hotrodder13]

new boot on took me about an hour to remove old and drill the new one [frame][/frame]

[ratrodmog]

looks nice dude. where are you putting the number plate out of interest?

[hotrodder13]

well, for the time being while white, its a vinyl numberplate in the same place, but when its painted black, im going to stick silver vinyl letter on and clear laquer over them

but as low down as possible

[ratrodmog]

Nice I like the sound of a stick on number plate.

[hotrodder13]

its matt black with silver letters for the time being, look gud

[ratrodmog]

Pics?

[hotrodder13]

ill get sum up when i got sum time

[hotrodder13]

compareing the boots [frame][/frame]new lights off ebay[frame][/frame]

[Fingolfin]

Will it end up the same color as the rest of the car, or will you leave it white? Sorry if that's an obvious question.

[hotrodder13]

its ok, the car was ment to be painted last month but its got pushed back, it will all be black when ive finished repairing the car

[RobMoore]

you may want to check with the local plod re the legality of your number plate lights afaik your plate should be visible at night

[hotrodder13]

its a bad pik, u can see it