Roll over jig
Posted: Thu Aug 26, 2010 9:16 pm
Pinched from another forum - roll over jig in timber. I would want a few more bolts and perhaps thicker section timber - but I like the simplicity of it!
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Roll over jig
Page 1 of 1
Re: Roll over jig
Posted: Thu Aug 26, 2010 9:37 pm
All very well until you set it on fire with the welding!!!!!!
Re: Roll over jig
Posted: Thu Aug 26, 2010 10:18 pm
...if the woodworm don't get to it first! 
Re: Roll over jig
Posted: Fri Aug 27, 2010 12:14 am
That's awesome! 
I have designed mine to work in a similar way but am waiting to get the box section to make it, I might just make it in timber... a sturdier version of that would be ideal I would imagine
I have designed mine to work in a similar way but am waiting to get the box section to make it, I might just make it in timber... a sturdier version of that would be ideal I would imagine
Re: Roll over jig
Posted: Fri Aug 27, 2010 8:46 am
I like the simplicity of it too.
I'd use 2 quadrants each end with some off cuts sandwiched in between to keep them rigid.
I'd use 2 quadrants each end with some off cuts sandwiched in between to keep them rigid.