Page 1 of 1

Trafficators Query

Posted: Mon Aug 23, 2010 8:47 pm
by EwenCameron
I have a 1954 Splitscreen that used to have trafficators. I would like to reinstall them.
Could anyone give me some advice on how to replace them and can they be set up to work in conjunction with the indicators.
I can only see them on ebay and not at any shop. Would the following work

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

Regards Ewen

Re: Trafficators Query

Posted: Tue Aug 24, 2010 4:03 pm
by mike.perry
Go to Series MM website http://seriesmm.mmoc.org.uk Technical Info and scroll down to the indicator / trafficator wiring diagram.
This uses the original 2 way switch with the red warning light. If you have any problems with the warning light get back to me.

Re: Trafficators Query

Posted: Tue Aug 24, 2010 5:31 pm
by charlie_morris_minor
this is a service kit, for when the bulb has gone or the plastic has aged so much that you can not see anything.. so if you trafficators pop out then this will work but, if they do not pop out you will need to get new trafficators.

Re: Trafficators Query

Posted: Fri Aug 27, 2010 12:55 pm
by marcusthemoose
can i get this to work with the column stalk and the silver barrel lucas relay?

Re: Trafficators Query

Posted: Fri Aug 27, 2010 2:12 pm
by DAVIDMCCULLOUGH
Yes you need to fit a flasher unit for each side so that the trafficator doesnt flash as well. I have this done on the lowlight and also on the traveller.

Re: Trafficators Query

Posted: Fri Aug 27, 2010 2:40 pm
by marcusthemoose
thank you muchly, i think this will be a project to add to the list.