sills
Posted: Mon Aug 09, 2010 10:37 pm
1.what is the part called where the sill rail finishers bolt onto
2.Are these easy to replace[frame]
[/frame]
2.Are these easy to replace[frame]
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
sills
Page 1 of 1
Re: sills
Posted: Mon Aug 09, 2010 11:23 pm
Outer sill, the 1/4 panel is not the easiest to replace, chances are when you remove the rear wing to do the repair the mounting flange for the back wings will also be rusty......
Re: sills
Posted: Tue Aug 10, 2010 7:06 am
yes the flange at the back is rust so which one would i replace first
Re: sills
Posted: Tue Aug 10, 2010 9:41 am
Repair the wing mounting flange first. Or at least that is the order I did it on the convertible. Then you can mount the rear wing to check the B pillar repair section is in the right place before fully welding it.
Re: sills
Posted: Tue Aug 10, 2010 9:54 am
good point right so the flange then the 1/4 part now does anyone know what the panel is called where the sill rail finisher bolts onto
Re: sills
Posted: Tue Aug 10, 2010 12:42 pm
That would be "Outer Undersill R/H (2-Door/Convertible)" http://morrisminorspares.co.uk/shop/pro ... 91f8c61114
