Page 1 of 1
gearbox problems
Posted: Fri Aug 06, 2010 7:34 pm
by caswellfoggy
i have just changed the engine and gearbox, on a minor 1098 i have just bought (a long story) now the captive nuts on the gearbox are turning when i am trying to do up the bolts. any suggestions greatly appreciated. thanks in advance. kev
Re: gearbox problems
Posted: Fri Aug 06, 2010 7:49 pm
by Jefftav
Kev, If you re-post this into the mechanical section you might get more answers. Also be a bit more specific as to which nuts you mean as the only captive nuts I can think of are on the chassis legs when bolting up the gearbox xmember. A picture always helps.
Re: gearbox problems
Posted: Fri Aug 06, 2010 8:10 pm
by LouiseM
Jefftav wrote:Kev, If you re-post this into the mechanical section you might get more answers.
No need to re-post it as it has now been moved.
Re: gearbox problems
Posted: Fri Aug 06, 2010 8:54 pm
by bmcecosse
If it is the X member bolts - you need to lift the trans tunnel cover to get at them. Can't think of any other 'captive nuts' on the engine/box!