Page 1 of 1

STEERING COLUMN

Posted: Sun Aug 01, 2010 9:30 pm
by samuria
hi , coming home from a trip to the coast, hit a large pothole :( got home . when putting car in to my drive the steering column seems loose :( i can lift it up and down and pull the wheel towards me ? not a lot of movement but it wasnt like this before :cry: :cry: :cry: any idea where to start to look will be most helpful thanks

Re: STEERING COLUMN

Posted: Sun Aug 01, 2010 9:39 pm
by aupickup
the pinch bolt at the base of the column

Re: STEERING COLUMN

Posted: Sun Aug 01, 2010 11:11 pm
by bmcecosse
URGENTLY!

Re: STEERING COLUMN

Posted: Mon Aug 02, 2010 2:57 pm
by samuria
thanks. i have tightened the pinch bolt, but there is still some slight movement when the wheel is pulled forward? what could that be :( :( :(

Re: STEERING COLUMN

Posted: Mon Aug 02, 2010 5:58 pm
by MarkyB
The nut that holds the wheel?
Not you, the other one!

Re: STEERING COLUMN

Posted: Mon Aug 02, 2010 7:36 pm
by samuria
:lol: :lol: :lol: very good!!!! the nut is tight yes the one that holds the wheel on the column :D

Re: STEERING COLUMN

Posted: Mon Aug 02, 2010 8:49 pm
by bmcecosse
Worn rack possibly - but most likely - worn bushes in the column.

Re: STEERING COLUMN

Posted: Mon Aug 02, 2010 9:10 pm
by samuria
thanks roy. is it a easy job if its the bushes? and are they still avalable?

Re: STEERING COLUMN

Posted: Mon Aug 02, 2010 9:31 pm
by bmcecosse
I think in the Minor column they are just tightly compressed oil soaked felt. The Mini column started like that too - and then moved over to plastic bushes - I have no idea if the plastic bushes can be used on the Minor column but may be worth investigating if the movement is worrying you.