Page 1 of 1
Rocker cover paint & badges
Posted: Thu Jul 08, 2010 11:37 pm
by yellowpinky
I am going to paint the rocker cover on my engine. I have the correct green engine paint, but I wondered if it would be a good idea to use zinc primer underneath? Good for rust but is it designed to stand high temperatures like the green stuff?
Also, I'm going to fit new 'Morris' & 'Patents' badges. It would be handy to know which way around they were mounted originally?
Re: Rocker cover paint & badges
Posted: Fri Jul 09, 2010 11:53 am
by bmcecosse
I wouldn't bother with primer - just make sure it's well degreased. I'm not sure there is 'right way round' - someone will know!
Re: Rocker cover paint & badges
Posted: Fri Jul 09, 2010 4:23 pm
by PSL184
Does this help....?
You might have to zoom in due to the small size of pics on the site.....
[frame]
[/frame]
Re: Rocker cover paint & badges
Posted: Fri Jul 09, 2010 5:52 pm
by bmcecosse
I was going to suggest that way - but I'm not sure it was universally that way. Certainly - the labels should not be upside down!!
Re: Rocker cover paint & badges
Posted: Wed Jul 14, 2010 11:23 am
by rcharman
Hi from Australia
I replaced these badges as they were from original before the restoration.
Hope this has helped.[frame]
[/frame]