Page 1 of 1
changeable part between models?
Posted: Fri Jun 11, 2010 12:40 pm
by silly
hey guys some more questions if you feel like answering, just about to weld some mounts on an escort diff housing and wanted to know are the series 2 diff the same width as the later model. anyone got a center measurement for axle perches for both models. so what i want to know is if i set this escort diff up the same as my series 2 diff can i use the diff on a later model.
Re: changeable part between models?
Posted: Fri Jun 11, 2010 2:25 pm
by twincamman
Yes both types are the same width. As for spring mounts, the Minor has them at 40" centre to centre. The Escort is 38"
Re: changeable part between models?
Posted: Fri Jun 11, 2010 3:56 pm
by bmcecosse
The 'diff' will not be interchangeable between Minor and Escort axles....... if that's what you are asking ???
Re: changeable part between models?
Posted: Sun Jun 13, 2010 1:45 am
by silly
thanks twincamman. sorry bm i probably didnt explain that very well. yeah im setting up an escort diff and was measuring from a series 2 diff and wasnt sure it would fit a later model morris minor. i decided my car was too rusty so i stripped and waiting to get something else,