Page 1 of 1
Quarterlights
Posted: Mon May 31, 2010 11:00 pm
by rsawatson
Is there any way you can stiffen up the quartlights so they are less susceptible to blowing shut at high speeds?
Re: Quarterlights
Posted: Mon May 31, 2010 11:29 pm
by limegreen
I believe mine have been left in a garage for a few years and never ever WD40'd...
Re: Quarterlights
Posted: Mon May 31, 2010 11:54 pm
by RobMoore
there are two screws along the bottom edge, AFAIK one of them adjust how stiff they are, I think its the one fwd.
Re: Quarterlights
Posted: Mon May 31, 2010 11:58 pm
by mike.perry
Use a big Philips screwdriver on the big Philips screw at the bottom. That tensions them up. They should stay open at speeds reached by a normal Morris Minor
Re: Quarterlights
Posted: Thu Jun 03, 2010 3:35 pm
by aupickup
and they should have thin springy washers behind the screws to stop the paintwork chipping
Re: Quarterlights
Posted: Thu Jun 03, 2010 5:45 pm
by moggie-tom
Tried to tighten mine today, they blow shut at about 50mph but the screws wouldn't go any tighter. Don't really find it a problem though.