Page 1 of 1

bonnet badge colours ?

Posted: Tue May 25, 2010 8:54 am
by barrie102
Does anyone know where to aquire the red (Cherokee red) enamel paint and the blue (?) enamel used in the bonnet badges.

Re: bonnet badge colours ?

Posted: Tue May 25, 2010 9:10 am
by polo2k
have you tried Humbrol model enamel?

Re: bonnet badge colours ?

Posted: Tue May 25, 2010 12:05 pm
by barrie102
polo2k wrote:have you tried Humbrol model enamel?
yup, they do not list the cherokee red. and I don't know what the blue is (Yet).

Re: bonnet badge colours ?

Posted: Tue May 25, 2010 12:13 pm
by RobMoore
I did mine the other evening with Citadel acrylics though I will have to wait till I get home afetr work for the colour names.

Re: bonnet badge colours ?

Posted: Tue May 25, 2010 3:29 pm
by Trabantdave
Hi,

just my tuppence-worth; I think that Humbrol 19 Gloss Bright red and 48 Gloss Mediterranean blue are close; one advantage of Humbrol enamels is that they are mixable, so you can acheive a very wide range of shades, and they dry slowly enough to not show brush marks.

I am not too sure about water-based acrylics as I've had limited success using them for models, but then I am 'old school'

Regards

Dave

Re: bonnet badge colours ?

Posted: Tue May 25, 2010 4:36 pm
by ASL642
Believe it or not I've used nail varnish on the bonnet top badge (redish) as it achieves the slightly marbled effect I've also used humbrol paint and it's lasted 6 years and counting. :D

Re: bonnet badge colours ?

Posted: Tue May 25, 2010 4:57 pm
by RobMoore
Here is what I used, the Red is GamesWorkshop "Blood Red" whilst the blue was GamesWorkshop "Enchanted Blue"
Humbrol equivalent is roughly 220 Ferrari Red and a mix of 14 French BLue and 15 Midnight Blue

@ Trabant
I am also old school and was very enamel orientated, however since I got to the point where I needed to paint hundreds of figures for various wargames armies in a short time. the enamel just didnt cut it as drying time was way to long.
A change to acrylic enabled me to achieve fast results whilst also being able to get much nicer detailing but it involved a dramatic change to my painting style.
I'll take some photos of some of my figures and upload, I know I have a great looking confederate army in acrylic but not sure I have anything left in enamel.

Re: bonnet badge colours ?

Posted: Tue May 25, 2010 7:18 pm
by RobMoore
zuaves painted with acrylics
[frame]Image[/frame]

Re: bonnet badge colours ?

Posted: Tue May 25, 2010 7:26 pm
by charlie_morris_minor
regaliaqueen wrote:Believe it or not I've used nail varnish on the bonnet top badge (redish) as it achieves the slightly marbled effect I've also used humbrol paint and it's lasted 6 years and counting. :D
i only ever had black nail varnish! and it is probably all dried out by now!

Re: bonnet badge colours ?

Posted: Wed May 26, 2010 9:18 am
by ASL642
No comment! :lol:

Re: bonnet badge colours ?

Posted: Wed May 26, 2010 10:09 am
by mike.perry
Maybe Regalia could stock the correct colour model paint? :-?