Page 1 of 1

clutch pedle

Posted: Sat May 22, 2010 10:46 pm
by hotrodder13
how much free play should be on the clutch pedle

thanks tom :D

Re: clutch pedle

Posted: Sat May 22, 2010 10:47 pm
by bmcecosse
About 1" - that's 25.4mm for you metric chapies!

Re: clutch pedle

Posted: Sat May 22, 2010 10:48 pm
by hotrodder13
oh mine seems to have a lot, its lets the clutch off at the bottom 1" of the peddle

Re: clutch pedle

Posted: Sat May 22, 2010 10:58 pm
by bmcecosse
Risk of mashing 1st gear and the syncro - as the clutch may not be freeing properly.

Re: clutch pedle

Posted: Sun May 23, 2010 8:00 am
by hotrodder13
thanks ill adjust it later :D

Re: clutch pedle

Posted: Sun May 23, 2010 8:20 am
by Alec
Hello HR,

I suggest you buy a workshop manual as that gives you the data you require, to hand, when you need it?

Alec

Re: clutch pedle

Posted: Sun May 23, 2010 9:10 am
by hotrodder13
is that the haynes manual :D

thanks

Re: clutch pedle

Posted: Sun May 23, 2010 10:29 am
by PSL184
If you ask bmcecosse he will tell you the best place to get the proper manual :wink:

Re: clutch pedle

Posted: Sun May 23, 2010 4:26 pm
by bmcecosse
:roll: :wink: