Page 1 of 1
wheel studs
Posted: Fri Mar 05, 2004 6:44 pm
by s.richardson
ello everyone , all well i hope, could someone tell me how to change the wheel studs please,thankyoukindly,steve
Posted: Fri Mar 05, 2004 8:35 pm
by morrismanic
You dont say front or rear studs need replacing for the rear you need to remove the drum and half shaft then knock off the locking tabs and remove the hub assembely use a copper hammer and remove the old stud then replace. fror the front you need to remove the drum and hub assembley and remove the stud with the copper hammer knock back in with the copper hammer. re fitting is reverse of removal ( just like in haynes manual style) hope this helps you out
Posted: Fri Mar 05, 2004 8:54 pm
by s.richardson
its the rear cheers maTE,STEVE
Posted: Sat Mar 06, 2004 8:23 pm
by les
Could be wrong, but I thought the studs could be removed without taking the hubs off?