Page 1 of 1
Wheel bearing - Series MM Diff
Posted: Mon Apr 26, 2010 4:06 am
by oliver-morrisminor
Hi does, anybody know what the i.d. number is for the wheel bearing
that fits the diff of a Series MM Minor?
And/Or where you can get them?
Here in OZ the local bearing/fastner shop has been
as helpful as they can be, but so far cannot identify it.
Re: Wheel bearing - Series MM Diff
Posted: Mon Apr 26, 2010 5:45 pm
by mike.perry
Hi Oliver,
Is it the inner or outer bearing? Usually it is the outer bearing that gets noisy. To get to the inner bearing you have to strip the diff - not recommended, read the workshop manual first.
The original part nos. were Inner Bearing 101608
Outer Bearing 101434
Oil Seal 101438
If it is the outer bearing that has gone then take it with the oil seal to the bearing shop and get them to measure it and match it to their stock
Re: Wheel bearing - Series MM Diff
Posted: Mon Apr 26, 2010 9:59 pm
by oliver-morrisminor
Mike thanks, the puter one is very "noisy" on both sides.
I will remove them and take your advice.
thanks oli
Re: Wheel bearing - Series MM Diff
Posted: Tue May 04, 2010 9:01 am
by oliver-morrisminor
Hi all I have secured new sealed wheel bearings and oil seals for both front and rear.
I took in all my old ones and the bearing shop was able to match them for me.
REPLACEMNT NUMBERS
FRONT:
Inner RLS72RS
Outer RMS52RS
Oil seal 400041N
REAR:
Outer RLS92RS
Oil seal 401870N
I have not fitted them yet but they look to be the right stuff. About $75 Aussie all up!
Re: Wheel bearing - Series MM Diff
Posted: Tue May 04, 2010 1:28 pm
by mike.perry
Well done and thanks for the bearing nos. If you have modified the front drums to fit M1000 swivel pins the bearings are
RHP 6205 inner and RHP 6303 outer.