Morris Minor Owners Club

hi how do i fit a oil pressure gauge on a later morris minor

G AU ge I hope. Same as any other. Install gauge in car, run tube through to engine bay, fit T piece in place of oil pressure switch, fit switch to T piece and fit gauge tube to T piece. Job Done.

i'm in the middle of doing exactly this, however i started with an oil pressure gauge that was just fitted and not wired up.

Prob best to look for a gauge that comes with the pipe to connect to the block. I got one from mocal, and spent a good few hours fiddeling with the pipe to get it connected to the gauge and block. Can check ebay maybe?

Also consider temp gauge if you dont have one, poss revo as well? classic mini ones are nice.

Good luck, let us know if you get stuck!

can i fit the oil gauge pipe from a series II and put it onto the oil gauge

Yes - should be fine.