Page 1 of 1
wheels
Posted: Wed Feb 10, 2010 5:29 pm
by grumpygrandad
hello can any one say if theires a difference in morris 1000 rims and wolseley 1500.rims thankyou.gg
Re: wheels
Posted: Wed Feb 10, 2010 6:06 pm
by PSL184
Hmmm, don't think so. Not even on the Riley either although they did specify 5.60x14 as original tyres. Someone will know for sure but I would have asked you, gg, as a previous owner of a "W"

Re: wheels
Posted: Wed Feb 10, 2010 6:22 pm
by grumpygrandad
hello thankyou its the wheels fitting on the drums will they interchange..gg
Re: wheels
Posted: Wed Feb 10, 2010 6:33 pm
by PSL184
Oh, yes - definately!
Re: wheels
Posted: Wed Feb 10, 2010 7:13 pm
by grumpygrandad
helllo thankyou im thinkihg a set of minilites if i can get them,thankyou,gg
Re: wheels
Posted: Wed Feb 10, 2010 8:55 pm
by bmcecosse
Nice wheels - remember they must be for 4" PCD on Minor (and W and R)!
Re: wheels
Posted: Wed Feb 10, 2010 11:16 pm
by grumpygrandad
hello thankyou both gg
Re: wheels
Posted: Thu Feb 11, 2010 7:22 pm
by FrankM83
http://cgi.ebay.co.uk/MG-Midget-13-HL-M ... 965wt_1084
Just bought a set of these myself look quite nice and I think quite a good price
Re: wheels
Posted: Thu Feb 11, 2010 7:24 pm
by PSL184
but, only 13". Correct size for a Minor is 14" which are available from Bull Motif etc....
Re: wheels
Posted: Thu Feb 11, 2010 7:41 pm
by bmcecosse
And they say suitable for Imp - but it uses 12" wheels! Although granted at 4" pcd......
Re: wheels
Posted: Thu Feb 11, 2010 7:45 pm
by grumpygrandad
hello are you fitting them to themorris im thinking of wolseley 1500 i love those wheels and have been in touch with same company..gg
Re: wheels
Posted: Thu Feb 11, 2010 7:49 pm
by bmcecosse
Well - 13" look daft enough on Minors - they would certainly look very strange on a Wolseley - but presumably you are negotiating for a set in 14" GG ? And - I think you would do better with 165/70 tyres ?
Re: wheels
Posted: Thu Feb 11, 2010 7:56 pm
by grumpygrandad
hello i am looking for 14 inch ais as you say 13s is a no no gg