Page 1 of 2
1964 Morris Minor (BCD 210B)
Posted: Tue Jan 19, 2010 5:36 pm
by mmjosh
Hi there this is the morris minor i have bought off moggietom and hopefully might be restoring it so i thought i would show a few pictures of how it is now and hopefully put loads more on when i have stripped the front end down.
cheers josh[frame]

[/frame][frame]

[/frame][frame]

[/frame]
Re: 1964 Morris Minor (BCD 210B)
Posted: Tue Jan 19, 2010 5:45 pm
by pjh56
As you say it'll make a great daily driver and will certainly turn heads.
Re: 1964 Morris Minor (BCD 210B)
Posted: Tue Jan 19, 2010 5:47 pm
by mmjosh
yes it has a alternator conversion and had a reconditioned engine fitted i have removed the front bumper earlier and some of the grille bolts.
Re: 1964 Morris Minor (BCD 210B)
Posted: Tue Jan 19, 2010 5:48 pm
by pjh56
You certainly don't hang around, when do you think you'll have it back on the road.
Re: 1964 Morris Minor (BCD 210B)
Posted: Tue Jan 19, 2010 5:55 pm
by mmjosh
not sure yet but it certainly be back on the road i am going to guess if it goes to plan about june/july 2010
Re: 1964 Morris Minor (BCD 210B)
Posted: Tue Jan 19, 2010 6:51 pm
by Dean
mmjosh wrote: if it goes to plan about june/july 2010
Credit where it's due Josh, you are a hard worker! Best or luck.
Re: 1964 Morris Minor (BCD 210B)
Posted: Tue Jan 19, 2010 7:02 pm
by Sidney'61
mmjosh wrote:not sure yet but it certainly be back on the road i am going to guess if it goes to plan about june/july 2010
Don't you have school work to do?

Re: 1964 Morris Minor (BCD 210B)
Posted: Tue Jan 19, 2010 8:25 pm
by mmjosh
i have half a day at school tomorrow so am hopeing to get the grille off and the wings as my morris minor mate who deals with them is going to come and investigate and tell me if it can be done then if it can be done he will take it away and repair it for me then i can put it all back together.
Re: 1964 Morris Minor (BCD 210B)
Posted: Wed Jan 20, 2010 5:46 pm
by mmjosh
both wings,bonnet and grille have been taken off today.[frame]

[/frame][frame]

[/frame][frame]

[/frame][frame]

[/frame][frame]

[/frame][frame]

[/frame]
Re: 1964 Morris Minor (BCD 210B)
Posted: Wed Jan 20, 2010 6:08 pm
by PSL184
It looks like its split the base of the inner wing clean off the chassis leg - which is lucky if it hasn't taken the leg with it. I'd need to see it or some pics of the offside though to be sure. I think it's an easy repair though all the same so don't be taken in for too much money if you are contracting the work out....

Re: 1964 Morris Minor (BCD 210B)
Posted: Wed Jan 20, 2010 8:30 pm
by Mogwai
All looks doable. hopefully the chassis legs have missed the impact which will make life easier.
Your damage is similar although a little worse as its on both sides to the accident I had last year
http://www.mmoc.org.uk/viewtopic.php?f=5&t=23704
Re: 1964 Morris Minor (BCD 210B)
Posted: Wed Jan 20, 2010 9:19 pm
by andrew.searston
looks like somebody will be busy
does look like it could be saved will a bit of time and of course money

Re: 1964 Morris Minor (BCD 210B)
Posted: Thu Jan 21, 2010 6:48 pm
by mmjosh
decided to break this as i have had a morris dealer come roound and say its beyond repair
Re: 1964 Morris Minor (BCD 210B)
Posted: Thu Jan 21, 2010 6:54 pm
by PSL184
Dont believe it. I've fixed much worse

Re: 1964 Morris Minor (BCD 210B)
Posted: Thu Jan 21, 2010 6:56 pm
by mmjosh
the roof is full of filler
Re: 1964 Morris Minor (BCD 210B)
Posted: Thu Jan 21, 2010 7:30 pm
by DaisyMayFozz
turn it into a convertable? ,I think that it is fixable.
Re: 1964 Morris Minor (BCD 210B)
Posted: Thu Jan 21, 2010 8:11 pm
by StaffsMoggie
Or just replace the roof with one off a scrap Minor, I did that with one that had been rolled.
Re: 1964 Morris Minor (BCD 210B)
Posted: Thu Jan 21, 2010 8:28 pm
by jonathon
Must admit the roof does look a bit dented. So see the positive here and build a convertible, should be ready for the summer
Who came to see the car??

Re: 1964 Morris Minor (BCD 210B)
Posted: Thu Jan 21, 2010 9:14 pm
by mmjosh
dave turner from measham
Re: 1964 Morris Minor (BCD 210B)
Posted: Thu Jan 21, 2010 9:20 pm
by jonathon
Not heard of him, whats the company name.
