Page 1 of 1
glovebox bolts
Posted: Mon Jan 18, 2010 9:20 pm
by FrankM83
Hi all what is the correct size bolt to hold the gloveboxes in place please? thanks
Re: glovebox bolts
Posted: Mon Jan 18, 2010 9:51 pm
by aupickup
thewy are self tapping screws
Re: glovebox bolts
Posted: Mon Jan 18, 2010 10:28 pm
by mike.perry
Unless you are refering to the lids.
Re: glovebox bolts
Posted: Mon Jan 18, 2010 10:32 pm
by PSL184
From memory 7/16" but I'd have to check if UNF or UNC....
Re: glovebox bolts
Posted: Tue Jan 19, 2010 12:40 am
by DAVIDMCCULLOUGH
I think its 2ba........
Re: glovebox bolts
Posted: Tue Jan 19, 2010 8:11 am
by FrankM83
sorry yes forgot to mention it was for the lids!
Re: glovebox bolts
Posted: Tue Jan 19, 2010 8:57 am
by alanworland
Mine are 2Ba
Re: glovebox bolts
Posted: Tue Jan 19, 2010 11:27 am
by mike.perry
Series MM are hex head bolts, 1098 are philips head bolts, all the same thread. 948 glove box lids when fitted were screw fitted hinges. Correct me if I am wrong!