Page 1 of 1

Door top alignment

Posted: Sun Jan 17, 2010 8:54 pm
by lesrollins
Today I fitted a pair of stainless steel door tops but I am having a problem aligning or making flush the rear of the door top with the door pillar. I have drilled the three bolt holes at the back to allow a little more side movement it helps a little but the door top is still not sitting flush by the door pillar. The door tops I removed both sat flush with the door pillar. Any ideas please. :D

Re: Door top alignment

Posted: Sun Jan 17, 2010 8:56 pm
by aupickup
you can bend them in slightly, but make sure the glass is wound down

Re: Door top alignment

Posted: Mon Jan 18, 2010 3:12 am
by lesrollins
I will try it at the weekend and let you know how I get on cheers.