traveller rear timber/lower bracket bumper studs and corner

Post by **malpad** » Thu Dec 10, 2009 9:34 pm

Need some help with images if possible. TRYING TO FIT THE FOLLOWING NEW PARTS "The rear lower bracket locates rear bumper studs" and the "corner bracket holds rear post" for the timber on a 68 traveller.
It was completely rusted away. Would ideally like some images from the side internally to see how the two parts fit in and marry with the timber and bump stop.

MANY THANKS

Post by **taupe** » Fri Dec 11, 2009 8:23 pm

Hi

You need to post a pic of the area youre talking about or the repair panels so that we can visualise where youre talking about!!

Im guessing that its the rear body mounting bracket that welds to the back of the rear mudguard and the bumper irons bolt to and the rear floor support that is bolted on through the rear floor extension from under the car and screwed and coach bolted to the timber rear door standing pillar. This support also holds the coach bolts for the bottom rear panel which fits behind the rear bumper.

Post by **malpad** » Fri Dec 11, 2009 8:35 pm

thanks Taupe that is the area i am talking about if you have any pics of this would be great.

Post by **DAVIDMCCULLOUGH** » Fri Dec 11, 2009 10:49 pm

Heres the freshly painted area on my splitscreen<br>

<br>
and before repair

Post by **malpad** » Mon Dec 14, 2009 10:39 pm

Thats great thanks for your help, we have it sorted with both your help.