Page 1 of 1
Heated Rear Windscreen
Posted: Tue Dec 08, 2009 5:59 pm
by rvwp
Hi all, has anybody found an easier alternative rear screen heater than changing the screen to one of the aftermarket heated screens. Also has anybody tried to fit an alternative indicator contol switch/dip switch combo on the steering column. My good lady seems to have difficulty in locating the floor mounted dip switch
Thanks Rich<br>
<br>
Posted: Tue Dec 08, 2009 6:05 pm
by PSL184
I've tried stick on window demisters and some work quite well whereas others have fallen off!!! However, all the stick on ones I've seen have quite thick wires so not very easy to look through.
Combination indicator / dip switch conversion is available here....
http://www.morrisminor.co.uk/index.htm
Posted: Tue Dec 08, 2009 7:40 pm
by bigjohn
funny this iv just bought a stick on rear heated screen kit and its fantastic realy thin wires just like a normal heated screen,plus iv just fitted a mk2 mini indicator stalk alot better
luckerly i had a speedo from a minor that as the indicator light in the speedo if you havent one you can always fit a seperate green light + you have to extend the high low beam wires to the stalk
Posted: Tue Dec 08, 2009 7:51 pm
by alanworland
How about one of those little heated blowers on the rear shelf?
I've never had any experience of them, but they don't seem expensive and might be worth a go.
Posted: Tue Dec 08, 2009 7:56 pm
by d_harris
Those 12v blowers are largely a waste of time in my experience
Posted: Tue Dec 08, 2009 10:31 pm
by PSL184
bigjohn wrote: realy thin wires just like a normal heated screen
It's about time they caught up with the modern tech
Dan_Harris wrote:Those 12v blowers are largely a waste of time in my experience
Agreed
Posted: Tue Dec 08, 2009 10:51 pm
by ssnjimb
how do u wire up a mk2 mini switch it has a plug on the end.
does the floor dipper hook up to some of the wires on the newer switch
Jamie
Posted: Tue Dec 08, 2009 11:29 pm
by bigjohn
the one i bought as the same conections as the minor [bullets] all the wires are the same colours,you only have to extend the dip/main beam wires upto the mini stalk,and those wires are the same colours also.
there is also a purple wire that needs a constent live for the headlight flash or as iv done wired that to the ignition so the flash only works with the ignition on.
now iv got to mess around with the mini steering coloum surround so i can cover the stalk and make it look presentable