One of those evenings.
Posted: Thu Sep 24, 2009 10:48 pm
Well, left Sky at home today while James fitted the new dynamo brushes, so when I got home we decided to fit the bits from Bull Motif to quieten the gear lever rattle.
Took the lever cover off and the 3 screws which revealed that the brass anti-rattle pin and spring were missing which was what I guessed was wrong.
But it took us nearly 2 hours to get the pin out that it fits into. In the end I had to take the passanger seat out so that I could drill into the pin to use a screw remover.
Got there in the end though and I'll see what difference it makes tomorrow.
Brian
Took the lever cover off and the 3 screws which revealed that the brass anti-rattle pin and spring were missing which was what I guessed was wrong.
But it took us nearly 2 hours to get the pin out that it fits into. In the end I had to take the passanger seat out so that I could drill into the pin to use a screw remover.
Got there in the end though and I'll see what difference it makes tomorrow.
Brian