Page 1 of 1

Traveller rear door/frame measurements

Posted: Sat Sep 05, 2009 9:44 am
by gppj25
!967 Traveller.
Not convinced that I have the frame alignment/measurements as good as they could be.

Can anyone tell me the exact measurements of the following:

1. The distance between the L/H and R/H rear posts measured at the base of the rear doors.

2. The distance between the L/H and R/H doors measured at the top of the rear doors.

I don' seem to be able to find this info anywhere.

Any help appreciated.

Thanks

Posted: Sat Sep 05, 2009 9:46 am
by gppj25
Slight mistake here - for 2 above I meant distance between the posts, not the doors.

Thanks

Posted: Sat Sep 05, 2009 4:22 pm
by bmcecosse
Mine - 42" top, 44 3/8" bottom.

Door measurements

Posted: Sun Sep 06, 2009 2:30 pm
by gppj25
Thanks for the info bmcecosse - appreciate it.

Regards

Re: Traveller rear door/frame measurements

Posted: Thu Apr 16, 2026 8:03 pm
by PeterCat
And me in 2026!!

Re: Traveller rear door/frame measurements

Posted: Thu Apr 16, 2026 8:59 pm
by svenedin
PeterCat wrote: Thu Apr 16, 2026 8:03 pm And me in 2026!!
Sadly BMCEcosse (Roy) passed away quite some time ago but I am sure he would be pleased that his post was helpful especially as his beloved Traveller has also gone. Part of his Traveller lives on in my car in the form of the Wolseley 1500 front brakes. Perhaps there is an MMOC "on the other side" where he can wax lyrical about Wolseley 1500 brakes. I have resisted the temptation to take up the mantel on this but it did cross my mind! :lol:

Stephen

Re: Traveller rear door/frame measurements

Posted: Thu Apr 16, 2026 9:36 pm
by les
When some of these old posts that Roy contributed to crop up, it’s nice to see his signature train appear ! :wink:

Re: Traveller rear door/frame measurements

Posted: Thu May 14, 2026 10:51 am
by stag36587
Roy was a big help to me too when I restored my 2 door, his advice was incredibly helpful. I had the pleasure of meeting him at his home when he was nearing the end of his life. I still own his orbital polisher