Page 1 of 1
4 Spoke Revolutions
Posted: Tue Sep 01, 2009 9:23 pm
by webbnuts
Good evening all.
Has anyone ever seen a Minor on 4 spoke revolutions? I have a 64 traveller in black, and think 4 spokes revolutions in black with silver rim would look quite smart. If anyone has a picture it would be a great help!
Regards,
Sam.
Posted: Tue Sep 01, 2009 10:11 pm
by plastic_orange
Yes, I've seen a Minor with revolutions, but don't have a pic. It looked fine - keep an eye on ebay.
Pete
Posted: Tue Sep 01, 2009 10:36 pm
by alanworland
Posted: Tue Sep 01, 2009 11:48 pm
by badobsession
i have this pic of one .
and he is on you tube think you can see the wheels
link.
http://www.youtube.com/watch?v=gKZF5RwrhEU
O and give GAS on this forum a shout he has a set of 6x13 for sale
i think he still has them ....
Posted: Wed Sep 02, 2009 7:28 am
by heathy12
I used to run similar, Fors Capri RS alloys....
on my two door saloon in my Very early minor days!
Still have them sat in My garage actually!
wheels
Posted: Wed Sep 02, 2009 7:45 am
by jonathon
How about these<br>
<br>
Posted: Wed Sep 02, 2009 4:09 pm
by dunketh
But... how many of those cars pictured are running standard moggy hubs?
There aint much choice in 4"
Posted: Wed Sep 02, 2009 4:21 pm
by jonathon
might be worth a call to Revolution to ask about PCD's
Wheels
Posted: Thu Sep 03, 2009 12:41 pm
by GAS
I have a set of 5 of these in 4 inch pitch
13x6 and 13x7
I have just started to blast them and they clean up well.
If you are interested you can let me know...
<br>
<br>
Posted: Wed Sep 16, 2009 7:52 pm
by geoff12
Hi Gas, Ive just seen your reply to Sam regarding your wheels if he isnt interested in them, I am a new owner of a 1971 Morris 1000 which is standard and i am finding it hard to get a set of wheels that will fit standard hubs, I have measured the existing hub and the measurements i have are 73mm between the centre of each stud working in a square pattern and 4 inches corner to corner in a cross pattern, I hope that makes sense, do you think your wheels will fit my Morris, I am based in Glasgow Cheers Geoff
Posted: Wed Sep 16, 2009 8:07 pm
by skelly
What do you think of these, just got them they fit the minor hubs.
they are made of alloy and have wolface written on them dont know to much about them.
.<br>
<br>
Posted: Wed Sep 16, 2009 8:43 pm
by geoff12
Like the wheels although have you got nuts that fit wheels because standard nuts wont fit, also will the hole in the middle of wheel fit over dust cap on hub, what are you looking for them, are there 4 or 5 wheels
