Page 1 of 1
Brakes!
Posted: Sun Aug 23, 2009 12:58 pm
by Naadeslaus
Is it the same brake pumps on a 1949 Serie MM as on Serie II???
Posted: Sun Aug 23, 2009 1:25 pm
by charlie_morris_minor
brake pumps i think we might have a problem with translation..
do you mean the brake master cylinder that sits in the chassis rail?
or the brake slave cylinders which are in the brake drums?
and sorry i do not know the answer..
Posted: Sun Aug 23, 2009 1:46 pm
by Naadeslaus
It's the brake slave cylinders;o)
Posted: Sun Aug 23, 2009 3:45 pm
by DAVIDMCCULLOUGH
The very early s11 have the same cylinders, then they changed. The proper type are readily availble now from ESM and cost about £40.
Posted: Fri Aug 28, 2009 10:44 am
by mike.perry
If you have the early suspension with the wheel bearings in the hubs then you will need Series MM front wheel cylinders. These are available from Bull Motif. The rear wheel cylinders are interchangeable.
If you have the Minor 1000 type suspension with separate brake drums then 948 pistons will fit and should be easily available