Morris Minor Owners Club

Hi All,
I've connected my small and large wire from the generator to the alternator and am now trying to rewire the regulator re the following instructions:

DYNAMO CONTROL - BOX REMOVAL

Locate terminal E on the control box. Disconnect the single black wire as this wire isn't used.

Locate terminal F . Remove the brown/green wire.

Locate terminal D . Remove the brown/yellow or plain yellow wire, and connect it to the brown/green wire disconnected from terminal F in step 2 above.

Remove the remaining wires from terminals AL ; A and D , connect them all together.

Insulate the connection.


WHAT IM HAVING PROBLEMS WITH IS:

I have multiple black wires coming from terminal E

and terminal D has multiple wires

I was wondering:

1. What I should be doing with the multiple wires?
2. Is it a problem that the colours they suggested aren't the one's in my regulator?




Thanks,
tom

Who gave you these instructions ???

Try this thread.
http://www.morrisminoroc.co.uk/index.ph ... ng+diagram