Page 1 of 3
Traveller restoration
Posted: Wed Jun 24, 2009 10:25 pm
by pegasus
Just thought i would share this with you, it started with a cracked nearside front spring hanger. New photos will be added weekly.
http://s697.photobucket.com/albums/vv340/01-pegasus/
Mark
Posted: Thu Jun 25, 2009 12:07 pm
by nslocomotive2
cool, looks like a lota work, there is a trend with these cars.
Posted: Thu Jun 25, 2009 6:29 pm
by pegasus
there does seem to be a trend with them at the moment, i was going to start this one next year but it was brought forward a little.
The off side was started yesterday, the spring hanger was cut out and replaced and all the new sill panels were collected today and most of the rotten ones are now cut out. Just need some more nice weather so i can put it back together.
Posted: Wed Jul 22, 2009 7:31 pm
by pegasus
Ime having a bit of trouble with photobucket at the moment so i thought i would post my pictures directly on here.
Hope you like them.
This is wippy (as the kids named him) before i started work on him<br>

<br>
This is the nearside front spring hanger removed<br>

<br>
near side floor by the spring hanger<br>

<br>
The floor was rotten up into the propshaft tunnel<br>

<br>
Posted: Wed Jul 22, 2009 7:36 pm
by pegasus
This is the nearside sill to door pillar<br>

<br>
Near side boxing plate and sill<br>

<br>
the floor behind the box section under the rear seat base<br>

<br>
near side rear floor<br>

<br>
And now its gone<br>

<br>
Posted: Wed Jul 22, 2009 7:42 pm
by pegasus
rear floor and inner step removed<br>

<br>
boxing plate and sills removed<br>

<br>
near side front pillar removed<br>

<br>
door pillar replaced<br>

<br>
near side boxing plate and sills the rest of the step was cut out later and replaced<br>

<br>
Posted: Wed Jul 22, 2009 7:43 pm
by pegasus
door pillar sills and foot rail<br>

<br>
near side inner step and rear floor replaced<br>

<br>
near side inner step<br>

<br>
spring hanger replaced and floor repaired<br>

<br>
spring hanger and floor<br>

<br>
spring hanger and floor<br>

<br>
Posted: Wed Jul 22, 2009 7:59 pm
by pegasus
My 11 year old son getting his hands dirty replacing the leaf spring<br>

<br>
and again<br>

<br>
near side B post<br>

<br>
i made this B post repair panel myself<br>

<br>
here it is fitted<br>

<br>
Posted: Wed Jul 22, 2009 8:07 pm
by pegasus
There was a hole in the roof this had to be welded up and then a new guttering was fitted<br>

<br>
Removing the off side tread revealed the same problem as the near side<br>

<br>
B post <br>

<br>
front door pillar<br>

<br>
removing the off side sill<br>

<br>
Posted: Wed Jul 22, 2009 8:14 pm
by pegasus
Off side sills removed<br>

<br>
Sills and boxing plate refitted<br>

<br>
and again<br>

<br>
home made off side B post repair panel<br>

<br><br>

<br><br>

<br>
Posted: Wed Jul 22, 2009 8:20 pm
by pegasus
These are the last lot of photos for the moment, today we removed the roof and one side of wood, we trial fitted the new side incase it needed some alterations before varnishing. (thats my son peering out of the car)<br>

<br><br>

<br><br>

<br>
Posted: Wed Jul 22, 2009 8:48 pm
by alex_holden
Impressive work on the B post panels.

Posted: Wed Jul 22, 2009 8:50 pm
by pegasus
Thanks Alex i can fit the off side now the wood is off, just waiting for a break in the weather.
Posted: Wed Jul 22, 2009 8:58 pm
by d_harris
How did you make them? Those are UBER impressive....
Posted: Wed Jul 22, 2009 9:19 pm
by pegasus
I made cardboard templates of all of the patterns and transfered them to the metal, These were then welded together on the inside and outside (so there are no gaps for the weather to get through). Then they were linished down into shape. There is a nice run of weld down the inside of the joints so they are really strong. I havent closed off the bottom of the post yet so i can get some waxoyl up there first.
Posted: Thu Jul 23, 2009 10:27 am
by taupe
Thats nice work
Well done!
Where was your timber from?
Posted: Thu Jul 23, 2009 11:44 am
by pegasus
I got the 2 sides in a job lot of spares that i bought, but the nearside front wheel arch section was broken and i had no replacement rear doors, so i got these from Traveller timbers. They have made a very good job of them.
I have a bit more welding to do and then i can start on the body work and respray before fitting the wood on permanently, but i will post more photos when i have them.
I have been watching your posts with intrest you are making a very nice job of your traveller, keep the photos coming.
All the best
Mark
Posted: Tue Aug 25, 2009 7:29 pm
by pegasus
I got some more photos leading up to today when i have finally managed to spray the cab, hope you like them.
This is my daughter she has claimed the car when she can drive.<br>

<br>
trial fitting the near side frame<br>

<br><br>

<br><br>

<br>
The rear floor extension before replacing, (i dont have photos of it done as my camera started playing up ) it was replaced and also the rear post brackets.<br>

<br>
Posted: Tue Aug 25, 2009 7:35 pm
by stevey
great job!!!
Posted: Tue Aug 25, 2009 7:37 pm
by pegasus
This was yesterday the kids had helped strip what was left inside and its ready for under coating.<br>

<br><br>

<br><br>

<br>
and now its all grey<br>

<br><br>

<br>
and the inside<br>

<br><br>

<br><br>

<br>